DACHNAYA STRELKA LUX 2.6 greenhouse is designed for creation of microclimate favorable for growing garden crops on cottage and household plots.
This product is no longer in stock
The frame of a new greenhouse "Dachnaya-Strelka" is made of strong galvanized profile ZN275.
DACHNAYA STRELKA LUX 2.6 greenhouse is designed for creation of microclimate favorable for
growing garden crops on cottage and household plots. Area of covered soil depends on length
of the greenhouse (table 1). Height of installed frame is 2.5 m, width is 2.6 m.
The greenhouse may have various length depending on desire of buyer. Required length of
greenhouse is provided by purchase of additional Vstavka packages adding 2 m to the base
length (Table 2).
Frame of greenhouse is made of galvanized steel and assembled using screws and nuts.
Greenhouse is fixed on the ground by digging special frame endings or on foundation using
mounting angles. The complete set includes all that is needed for fastening of coverage.
Greenhouse may be completed with coverage on buyer’s request. It has two door openings
and two small windows in opposite ends. The greenhouse may be completed with side small
windows on buyer’s request.
Before starting the operation, the greenhouse should be assembled and installed according
to the assembly manual instructions. When installing the greenhouse by third parties, the buyer
should check the assembly quality for compliance with the assembly manual instructions.
Do not install the greenhouse close to buildings and trees from which snow or ice may fall.
The distance of at least 2 m is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s.
In winter, coverage of greenhouse should not be removed provided that snow load is limited.
Should greenhouse be unattended all winter period, buyer should either remove the coverage
or estimate possible snow load. Ultimate load for the frame width 2.6 m having complete
package with installed drawbars and side braces appears under 450 kg snow cover per 1
m2 of horizontal ground surface corresponding to 2.25 m fresh snow layer or 1.1 m packed
snow layer. Ultimate load for the frame width 3 m having complete package with installed
drawbars and side braces appears under 360 kg snow cover per 1 m2 of horizontal ground
surface corresponding to 1.8 m fresh snow layer or 0.9 m packed snow layer.Recommended 4-6 mm depth of polycarbonate.
|Model||Dachnaya Strelka LUX|
|Frame||Modular of the galvanized steel profile|
|Number of polycarbonate sheets||2 sheets